____________________ > Atlanta
> System components
> Old Style
> Tools
> New kama EV97 semi-automatic bandsaw, band saw, miters
New kama EV97 semi-automatic bandsaw, band saw, miters
KAMA SEMI-AUTOMATIC HORIZONTAL BANDSAW, MODEL EV97, 220 Volts, 1 phase
* Factory list price of Model EV97...........................$ 3,795.00
* With factory stand................................................. included
* Subtotal................................................................$ 4,095.00
There is only ONE DEAL available at this price !!!
What is this? What do you get? Why the discount?
* What is this? It is a mitering (45 degree) horizontal bandsaw, powered blade feed with regulator, with coolant system on a stand. Also, the EV97 is equipped with quick action "slide and screw" vise.
* Why the discount? Well, I'm heavy on inventory and need to rotate some outta here.
What does "Semi-Automatic" Mean? (This KAMA EV97 is Semi-Automatic.)
"Semi-Automatic" DOES NOT mean "fully-automatic". A Semi-automatic saw will power thru a cut using a hydraulic or air cylinder, sometimes even a reduction or screw drive. No "elbow grease" is required to make the cut. Saws with "gravity feed" using the weight of the saw head with a combination of springs and "gravity" feed cylinders are NOT considered semi-automatic.
"Semi-Automatic" saws DO NOT feed and measure the length of material to be cut. This would be "fully-automatic".
As a descriptive concerning almost any type of saw, the term "Semi-Automatic" mean that there is some sort of powered mechanism that feeds the blade (saw head) into the material to be cut, thus performing the cut.
Reasons to Purchase a Semi-Automatic Saw:
* Your operator will be able to make more cuts in less time, eliminates "saw elbow syndrome".
* Consistent feed reduces blade wear to allow more cuts per blade, reducing your cost per cut.
A Word about QUALITY: (LOOK AT THE PICS !!)
This KAMA saw is a very high quality unit made in Italy. Please don't even bother comparing it to some of the other cheaper quality imports. It is imported by a fine company, Elderfield and Hall which can be found at kooltools.com. Parts and service are readily available. We are a stocking regional distributor for the KAMA saws and have been selling them for 12 years.
* Capacity is 6 3/4" round or square shapes at 90 degrees (straight cut)
* Capacity for rounds cut at 45 degrees is 4.93"
* Capacity for rounds cut at 60 degrees is 3.14" (Yes, this saw will miter at 60 degrees !!!)
* Capacity for rectangular shape at 45 degrees is 6.75" x 5.9"
A cold saw as described above is usually about $3,000.00 more than this KAMA EV97. Also, the EV97 will give you a much larger cutting capacity of 6 3/4" at 90 degrees. At it cuts straight. And you can cut a wider range of material without having to go to a different pitch a blade. And you can quickly miter by swiveling the head.
The KAMA EV97 is MORE of a general pupose saw and will save you many $$$ in the long haul compare to a cold saw.
Why should you spend more money for our Italian designed and built Kama Bandsaw than an asian one
you can get for a few hundred dollars less? Three reasons:
1. You get accuracy that no other bandsaw in the world comes close to. In fact, a KAMA Bandsaw
gives you accuracy rivaling a coldsaw, for about half the money and a lot bigger capacity.
2. Ease of use. The head of our bandsaw pivots to miter, not the vise. You save valuable shop space
by setting up your machine against a wall instead of in the middle of the shop floor. No other
machine gives you this much cutting capacity in this small a package.
3. The machines are built to take constant, heavy, day in and day out use for years.
Listed below are photos and examples of what we mean by each of these three reasons. An investment
in a KAMA Bandsaw is not an expense, it is a proven money maker that will deliver years of profitable
use. In fact, if you think about it, as a percentage of the value of the products you will make, over the
life of our saw, the cost of a KAMA Bandsaw is so small, you can t even measure it. Does it really make
sense to save a few hundred dollars on an asian machine, and go through the hassles of inaccurate
cutting, time consuming set up for mitering and running around looking for parts in a year or two?
We have designed and created this powerful KAMA bandsaw with exceptional and innovative technical
specifications that are unique to the market. Ongoing research, application and development are the
EV 996 and EV 97 KAMA Band saws come complete as shown with base, coolant system and control box,
You will be ready to start sawing in 15 minutes. The machines use standard, 3/4 x .035, bi metal
Our experience guarantees a range of KAMA band saws capable of satisfying all cutting requirements in
a fast, precise and completely safe manner.
YOU MUST BE ABLE TO UNLOAD WITH FORKLIFT OR PALLET JACK.
Machines must be removed from our facility within 14 days of sale. We reserve the right to charge storage fees after 14 days.
