____________________ > Atlanta
> System components
> Old Style
> Tools
> Delta 32-350R horizontal boring machine used must sale
Delta 32-350R horizontal boring machine used must sale
attention please read READ!!!!!!
* Adjustable hold-down clamp and boring head are pneumatically controlled by a foot pedal to keep operator's hands free
* See-thru guard protects from flying wood chips
* Heavy cast-iron table features dovetailed miter gauge slots for keeping miter gauge secure when locked in place; also with standard-equipped stock stop for operation that require repetitive drilling
* Loosening the nut just below the boring head allows the operator to quickly adjust the depth stop for final drilling depth; guide rails are concealed inside flexible rubber tubing for protection against dust and chips
* Tough cast-iron table is mounted on dovetail ways with an adjustable gib; the four bolts located on the right-hand side may be adjusted to compensate for wear
* Aluminum boring head contains two adjustable spindles
* Easy-to-read scale and reference lines for accurate setting
* Convenient grease fitting accepts standard grease gun for lubricating boring head
* Built-in chip chute directs dust and debris away from machine
* Cast-iron carriage supports motor and boring head
* Adjustable feed rate knob controls boring speed at which the drill bits enter the work piece
* Fabricated steel cabinet has bolt-down feet for operating stability
* Horizontal Boring Machine - 32-350
* 1 HP, 115/230 Volt, 3,450 RPM Single Phase Motor
* Adjustable Hold-Down Clamp w/ See-Thru Guard
* Cast-Iron Table w/ Dovetailed Miter Gauge Slots
All my woodworking equipment was taking care with pride
I DESCRIBE ALL TO THE BEST OF MY ABILITY. I AM NOT A DEALER or DO I PRETEND TO BE one.
We accept cash - money orders- cashier s checks
Freight, transport, and setting up are not included.
Palletizing & Crating will incur additional charges please advice
All items are offered locally and could be sold previous to end of listing.
For more detail information please call me, during business hours Chicago time -my name is Juan at (***) 316 0344 or send me an email at ****@aol.com with any related questions regarding this unit
We will help load Machine if need it
Unit has recently been inspected and tested to work as expected at the site job
Any Questions or comments, please feel free to contact me I will reply shortly
I have plenty clamps (pony #50) for sale please see other pictures!!!
