____________________ > Atlanta
> System components
> Old Style
> Hydrolic Components
> High pressure Components
> New intellicon hw 3250 economizer version heat manager
New intellicon hw 3250 economizer version heat manager
THE INTELLICON WILL SAVE YOU AT LEAST 10% ON YOUR Heating Costs ..GUARANTEED!
Brand new Intellicon HW+3250 with one sensor, warranty and guarantee documentation
This is the latest firmware release.
Similar to the less sophisticated Beckett Heat Manager both manufactured by Intellidyne
I am an Authorized seller be careful where you purchase to Protect Warranty
The Intellicon HW+ is similar to the less sophisticated Beckett Heat Manager which both are manufactured by Intellidyne. Both use same the technology but the Heat Manager uses older firmware additionally the Intellicon HW has an LCD panel that shows run time, economizer time, average savings, temp in addition it allows for further fine tuning that the Beckett Heat Manager does not allow. A much better unit. Please compare for yourself or call Intellidyne directly.
The IntelliCon HW+ is the only item I am selling as I am totally committed to saving homeowver's as much money as possible with home heating costs. I am an expert with the installation, operation and technical aspects of the IntelliCon. there isn't a question I can't answer!
The economy being what is and what it will be for the foreseeable future, let alone there is not accurate prediction of what home energy costs will be, it is critical for homeowners to minimize expenses associated with their home, the largest of which is heating which can exceed thousands of dollars annually. The Intellicon HW+ 3250 is a simple yet sophisticated control that has proven in case after case that it can save typically at least 10% in heating oil or gas heating costs. I have sold hundreds of these units and personally have seen many cases of energy savings in excess of 20%. My own home has a top of the line Biassi Riello boiler and with using the IntelliCon HW+ I realized a 12.4% savings last heating season which translated to about $380 in energy cost.
A home heating system must be able to provide acceptable comfort at the lowest anticipated outdoor temperatures. In the U.S. and abroad, most residential boilers have a heat capacity between 1.5 to 2 times larger than that needed to maintain the room temperature on those extreme days. Due to this over sizing of the boiler, the burner will cycle on and off repeatedly to prevent overheating of the system water during any call for heat. Using patented technology, IntelliCon -HW+ increases system efficiency. Thus, the heating system uses less fuel to generate the same amount of heat. This is done by dynamically changing the aquastat s effective dead-band based upon the measured heating load. This causes the average water temperature to be varied (depending upon the measured load), and is accomplished by extending the burner's s off-time. Extending the off-time also results in longer burns that are more efficient and a reduction in burner on/off cycling. Just as computer control has increased the gas mileage of automobiles, IntelliCon-HW+ improves the fuel utilization of heating systems, by supplementing the antiquated on/off control action of the aquastat with the analysis and control capabilities of a computer. Installation is simple for a qualified service technician and does not require any programming or adjustments total installation time is usually less then an hour. IntelliCon-HW+ typically reduces fuel consumption 10% to 20% and usually decreases burner cycling 30% or more whereby reduces wear and tear on the boilers moving parts. I have sold hundreds of the Intellicon HW+'s and have not one returned to date.
The IntelliCon -HW+ is a microprocessor-controlled, fuel-saving device for hot water (hydronic) heating systems. IntelliCon-HW+ reduces fuel consumption, wear on parts, flue emissions and electrical usage, when installed on any new or existing gas or oil burner. IntelliCon-HW+ saves energy by adjusting the burner run pattern to match the ystem s heat load. Its action is similar to the industry-accepted method of outdoor-air temperature reset control, but does not require an outdoor-air temperature sensor or the need to profile the building in order to adjust the reset controller properly. IntelliCon-HW+ determines the heat load by using an easily installed strap-on temperature sensor that monitors the boiler s out-flow water temperature and the rate that this temperature is changing.
The device is easily installed by any qualified licensed electrician or HVAC technician typically in less then an hour.
Free unlimited technical guidance, email or call 8-6 Monday through Friday. I just don't sell and forget, I take pride in my guidance.
Short payback period typically less then a year
Guaranteed to save 10% in home heating costs the first year or cost is refunded by manufacture
15 Year Limited manufactures warranty against operational breakdowns or defects
Unlike outdoor resets, after installation no further maintenance or calibration is required
Authorized Dealer, protect yourself and don't purchase from gray sellers
If you have a storage tank for your domestic hot water only a single sensor (included) is required, if you have a tankless setup for hot water you will require an additional sensor which I also sell for $19.50.
Brookhaven National Labs Labs Test Results.
Research and Development Authority Full Test Report.
Energy Research and Development Authority Abstract.
Residential case studies and Laboratory Test Results.
Learn More about the Intellicon.
IntelliCon -HW+ MODEL 3250 ECONOMIZER CONTROL FOR HOT WATER /HYDRONIC HEATING SYSTEMS. ENERGY STAR PARTNERIntelliCon -HW+ is a microprocessor-controlled, fuel-saving device for hot water (hydronic) heating systems. IntelliCon-HW reduces fuel consumption, wear on parts, flue emissions and electrical usage, when installed on any new or existing gas or oil burner. IntelliCon-HW+ saves energy by adjusting the burner run pattern to match the system s heat load. Its action is similar to the industry-accepted method of outdoor-air temperature reset control, but does not require an outdoor-air temperature sensor or the need to profile the building in order to adjust the reset controller properly. IntelliCon-HW+ determines the heat load by using an easily installed strap-on temperature sensor that monitors the boiler s out-flow water temperature and the rate that this temperature is changing.
* For systems up to 300,000 BTU
* Illuminated LCD display shows fuel consumption savings, operating modes, system diagnostics and
* Patented process reduces fuel consumption typically 10% to 20%
* Short payback period typically the first year
* State-of-the-art microcomputer controller
* Easily installed plug-in sensor(s)
(includes 1 required sensor)
* Simple installation by qualified installer
* Maximum efficiency year-round
* Reduces maintenance and extends boiler life
* Guaranteed to reduce fuel consumption
Save Oil, Protect the Environment, Reduce Foreign Oil Dependence and keep more money in your pocket
