____________________ > Atlanta
> System components
> Old Style
> Hydrolic Components
> High pressure Components
> Char-lynn power steering unit 201 1041 002/211-1179
Char-lynn power steering unit 201 1041 002/211-1179
Char-Lynn/Eaton H Series Low Speed High Torque Gerotor Element Spool Motors
Completely rebuilt, inspected and warrantied.
power steering control unit systems.
New char-lynn number: 211-1179
Series 12, open Center, Non Load reaction, 8-16GPM rated flow rate, (45.1/740 Cu.in/rev.)
Traditional power steering units are available for applications that don t require integral
valve capabilities. Typical applications range from mid size lift trucks to large farm tractors.
Valving - Reduced hydraulic noise level optimum flow gain characteristics on all models.
- 3 basic systems: Open centre, closed centre, load sensing
- 3 flow options : designed for best control in different capacity steering circuits -
11 l/min(3 GPM), 23 l/min (6 GPM), 45 l/min (12GPM) rated flow
- 2 basic load circuits - load reaction, non load reaction
Directly interchangeable with past and present applications
All models can operate at pressures up to 172 bar (2500 PSI)
12 Displacements - increments from 75 to 740 cm3/r (4.5 to 45.1 in3/r)
Manual steering check valve for limited manual steering
Available with fixed length columns
Max. System Pressure: 172 bar (2500 PSI)
Max. Back Pressure: 21 bar (300 PSI)
Rated Flow: - Series 3 7.5 - 15 l/min (2 - 4 GPM)
- Series 6 15 - 30 l/min (4 - 8 GPM)
- Series 12 30 - 60 l/min (8 - 16 GPM)
Max. Differential Between Steering
Unit & System Temperature: 28 C (50 F)
Input Torque: - Powered 2.8 - 4.0 Nm @ 6.9 bar back pressure*
(25 - 35 lb-in @ 100 PSI back pressure)*
- Non Powered 136 Nm (100 lb-ft) maximum
Fluid: ATF Type A and most petroleum based fluids
Recommended Filtration: ISO 18/13 cleanliness level