____________________ > Atlanta
> System components
> New Style
> Tools
> #900 solar seal rubber caulk-adhesive sealant/blk
#900 solar seal rubber caulk-adhesive sealant/blk
#900 Solar Seal 100% Terpolymer Rubber Caulk Adhesive Sealant.
Regular retail is 6.00 to 7.00 per tube.
Each box hold 12 tubes. Color is Black.
#900 SOLAR SEAL ADHESIVE SEALANT Since 1977
built on - 100% Terpolymer Technology Field Proven - Over 30 Years
an alternative to Silicone & Urethane Chemistry
COMMERCIAL / INDUSTRIAL AND HIGH END RESIDENTIAL SPECIFICATION DATA
#900 SOLAR SEAL - based on terpolymer
technology which offers an alternative to
Protect your investments with High
performance terpolymer chemistry that
provides exceptional weather resistance,
adhesion, elongation and color stability to
Architectural Metals Precast Panels
Asphalt Shingles PVC Trim Boards
Cured Concrete Termination Bars
Fiber Cement Board Vinyl Siding & Windows
Glass & Fiber Glass +More Building Materials
Clear, White, Black & over 200 NPC
Mfg. name & color stamped on each plunger.
Custom colors available in low
Intended for exterior use. Interior application
requires mandatory forced fresh air ventilation
until aroma dissipates. Inform solvent odor
sensitive persons this compound contains
Contact with expanded polystyrene
Joints under constant water submersion.
Apply 3/8" deep, like diagram to a temperate, clean,
dry, frost free structurally sound surface that is free of
oils, soaps, silicone, or loose material that may inhibit
bonding. Clean excess sealant with a solvent such as
xylene or by scraping. Warm tube overnight in cool
Do not tool inside corner joints..
Backer rod or bond breaker tape is required on butt
joints or control joints to prevent three point adhesion.
Do not apply when substrate temperature is above 125 F
Prior to application, obtaining the building owners
approval of the sealant color is the applicator's
Maximum joint & sealant width is 3/4"
Minimum application depth is 3/8"
PROPER INSIDE CORNER CURED BEAD
Consumer size, Approx. coverage = 14 Lin. Ft./tube
Pro-Size, Approx. coverage = 26 Lin. Ft/tube
Substrate application: 10 F to 125 F
Cured sealant temp. range: -40 F to 300 F
Primerless: Paintable after skin forms.
Stainable with solid color stains.
Meets performance requirements of
TT-S-00230c, Class A, Type II and ASTM
C-920, Type S, Grade NS, Class 25, Use
NPC warrants #900 Solar Seal will meet
the performance data tests listed below and
when judged according to the test methods
listed below. For best results on inside corner
joints the user must follow our installation
instructions and "Proper Cured Bead" diagram.
For other joint designs the user must test the
suitability prior to full application for his intended
shall be limited to the purchase price or
replacement of product exclusive of labor or cost
of labor. No other warranties implied or expressed
shall apply, including any warranty or fitness for
a particular purpose. NPC shall not be liable under
legal theory for special or consequential damage.
Expected life: 20+ years on inside corner joints
when installed as directed herein.
COMBUSTIBLE Do not use near heat or flame.
Contact NPC for written approval for use
WARNING: This product contains chemicals
known to the state of California to cause cancer
Consumer size tubes (10.3 oz), 12/case,
PRO-SIZE tubes (19 oz), 9/case
