____________________ > Atlanta
> System components
> New Style
> Hydrolic Parts
> Lowe pressure valves
> New hilti te 30-c-avr combi hammer in case
New hilti te 30-c-avr combi hammer in case
HILTI TE 30-C-AVR Combi hammer NEW IN CASE
The most versatile member of the TE 30 family is the TE 30-C-AVR. Able to chisel just like a combihammer, the TE 30-C-AVR offers the all-around hammering, drilling and chiseling performance sure to make it a fast favorite in a wide range of construction and renovation trades. Its main feature is Hilti s AVR, an active vibration reduction system that cuts vibrations up to two-thirds when compared to conventional tools. Not only does the TE 30-C-AVR s vibration resistance reduce the concern over long-term vibration exposure, it also increases productivity because longer switched-on times are permissible.
If an added chiseling function is what you need, the TE 30-C-AVR is the ultimate general purpose, get-it-done tool. And with 2/3 less vibration than conventional tools, you will not only get it done in style but with less user fatigue.
- Drilling anchor holes and through-holes in concrete, brick and block
- Light chiseling on brick and block, corrective chiseling and finishing on concrete
- Drilling in wood and metal using the keyless chuck and drill bits with smooth shank up to 13 mm dia.
- Driving anchor screws and concrete screw anchors
Single impact energy 2.4 ft-lbs
Dimensions (L x W x H) 14.92 x 3.7 x 8.4 in
Blows per minute 4080 impacts/minute
Triaxial vibration value for hammer drilling into concrete ( 12 m/s
Triaxial vibration for chiseling in concrete 11 m/s
Maximum drilling diameter range for hammer drill bits - rang 0.2 in - 1.1 in
Optimum drilling diameter in concrete (Imperial) 0.4 in - 0.8 in
Drilling Performance (Imperial) 3.8 in /min @ 0.5 in
AVR - Active Vibration Reduction Yes
TPS - Theft Protection System No
HILTI TE 30-C-AVR Combi hammer NEW IN CASE WITH GREASE, BIT AND MANUAL , as pictured below
