____________________ > Atlanta
> Electronic components
> Old Style
> Icom PW1 hf / 6M amplifier 1KW amp unused / unopened
Icom PW1 hf / 6M amplifier 1KW amp unused / unopened
ICOM PW1 HF / 6M AMPLIFIER 1KW AMP UNUSED / UNOPENED
This item is available for immediate delivery
This item is unused / unopened and comes in original box with manual (and all cabling / accessories as applicable)
A full 12 month seller warranty is applicable to this item
Available for sale is an Icom PW1 HF / 6M amplifier - unit is unusued / unopened - 12 month seller warranty is applicable
No tune, No knobs, No band change, No tuner knobs
Is this a boring amplifier or what? Icom's solid state jewel provides all.
The Icom IC-PW1 is a 1000 watt linear amplifier with built-in power supply. This state-of-the-art, heavy duty amp covers 160-10 meters plus 6 meters. It features auto band changing, four antenna connectors and three cooling fans. The control head is removable and remoteable. Two exciter inputs are available. This device is built to high construction standards inside and out. The power amp unit is designed for full duty transmission.
Input and output connectors are SO-239. Driving power may be up to 100 watts (60 watts minimum). Size of the main unit is: 13.8 x 11 x 16 inches. Total weight is 55.5 lbs (25 kg). The controller unit may be separate (as shown), or mounted on the top front panel.
Dimensions: 13.8 (W), 10.6 (H), 15.0 (D); 55 lb, 2 oz (approx.)
* Built in auto antenna tuner
* Capable of matching 3:1 SWR on HF, and 2.5:1 SWR on 6 meters
* Matches a wide array of antennas
* 100% duty cycle (even during RTTY or SSTV)
* Automatic AC input voltage selector
* Dual CPUs for system operation, monitoring and control
* CPU memories for automatic antenna selection and switching for fast band/antenna changes. Works with almost any make of HF, 6 Meter, or HF / 6M transceiver... not just ICOM rigs.
The remotable control head can be used for complete manual control of functions. The metering system is extensive, including power out, voltage, current, SWR, ALC and temperature. Although this nice amplifier is broadband, with no tuning system, there are other manual functions such as manual push button control of the automatic antenna tuner, antenna selection and input selections.
The amplifier protection feature is complex, providing protection of the amplifier for excesses of temperature of FETs, power supply voltage, FET current or ALC control level. The protection circuit will also invoke when amplifier and exciter have a band mismatch, power supply has a malfunction, the FET gain drops or the power level among the four PA units becomes unbalanced or is not properly shared.
The tuner will operate unaided or it can be manually provoked or turned off. It can handle a 3:1 SWR situation of about 25% reflected power just fine.
Two exciters can be connected and selected to four different antenna outputs. If the transceivers are capable (Icom), the 7 pin accessory socket cable, included, can provide transceiver control of most functions. If the transceiver is older, a remote control cable can be used to switch bands.
* Less than 15 A (max. output at 200
Email is the preferred means of contact - I undertake to answer all email enquiries within 24 hours (generally much quicker than this)
No warranty is made or given by me in respect to the appropriateness of the gear for your intended use / purpose (ie that a IC706MK2G will save you in a marine or outback emergency) and I will thus accept no responsibility for any loss or damage you may suffer from the failure / non performance of the gear for your intended use or otherwise.
I respect your privacy. Your details will never by given to any other party.
