____________________ > Atlanta
> Electronic components
> Lotos 3IN1 50A plasma cutter 200A tig stick mma welder
Lotos 3IN1 50A plasma cutter 200A tig stick mma welder
This is Lotos CT520D (50A plasma Cutter and 200A Tig/Stick welder). This machine was tested for plasma cutting and tig stick welding. It works perfect. The only problem is the digital meter and current dial. The digital meter does not reflect the real current. If you dial up to 24 amps for cutting, the oc light will be on and you shall turn off the machine and restart the machine. if you dial less than 24 amps, it cuts perfect. Arc welding works perfect.
The package comes with machine CT520D (new in box), plasma cutting torch and extra 20 pcs consumables, air hose, argon regulator, stick holder, ground cable. air regulator and filter and fitting kits.
A 220VAC 30Amps Power plug is installed on the machine. Machine is brand new.
For hobby and light metal working, this is great 3in1 machine with this price.
It is sold for 700 dollars for a new Lotos CT520D with all accessories on manufacture website.
Here is original description from manufacture website.
* Duty Cycle: 60% at 50 amps and 100% at 35 amps
* Rated Input Current: 27 amps
* 3" Per minute @ 1" Steel (Severance Cut)
* 7" Per minute @ 3/4" Thick Steel
* 17" Per minute @ 1/2" Thick Steel
* Air pressure required: 60~70 psi @ 3.6 cfm
* Output Current: 15-200 Amps
* Power Usage 17 Amps @ 220VAC
* Can Weld: Steel, Stainless, Moly, Ferrous
* Duty Cycle: 60% @ 200 Amps 100% @ 105 Amps
* High Frequency Start / HF Welding
* Gas Flow: 2-5L/min (using Argon supply)
* Power Usage 23 Amps @ 220VAC
* Duty Cycle: 60% @ 200 Amps 100% @ 95 Amps
* Working Voltage: 25 Volts
Again, I tested the plasma cutting (under 24 amps) and stick welding, it works great.
