____________________ > Ava
> System components
> Old Style
> Tools
> Hand tools
> Vegason 61. kx ultrasonic sensor level measurement
Vegason 61. kx ultrasonic sensor level measurement
Vegason 61. KX Ultrasonic Sensor Level Measurement
Low-cost, compact ultrasonic sensor for continuous level measurement.
Suitable for measurement of liquids and solids in virtually all industries, particularly in the water and waste water economy or storage of non volatile products.
All VEGASON units have ability to calculate volume from tank shape, a flow device (V-notch or Flume) with no additional control box needed.
2 wire loop powered (4-20mA) with HART, Profibus PA, Foundation Fieldbus or mains powered
* Transducer of PVDF with EPDM seal
* Integral display of "echo curve"
* Data logging built in, with event trigger
* Integrated temperature sensor for correction of the running time
* ECHOFOX signal processing with Fuzzy-Logic
* Adjustment with PLICSCOM, HART handheld or PC
* Instrument from the plics family
Ultrasonic sensor for continuous level measurement for measuring ranges up to 5 m
-Unaffected by product properties
Short ultrasonic pulses of approx. 70 kHz are emitted by the
transducer in the direction of the measured product, then
reflected back from the product surface and received by the
Ultrasonic pulses travel at the speed of sound. The time from
emission to reception of the signals is proportional to the level
in the vessel. The adjustment of the sensors is carried out via
the indicating and adjustment module PLICSCOM.
VEGASON S 61 is suitable for level measurement of liquids
and for use in small bulk solids vessels. The sensor is always
Typical applications are measurement of liquids in storage
vessels or open sumps up to a height of 5 m and can also
carry out flow measurement in open flumes or weirs.
When using the sensor on bulk solids, the maximum
measuring range is normally halved, but this depends on the
amount of dust generated and the consistency of the bulk
solid. Please contact us for advice if needed.
