____________________ > Ava
> System components
> Old Style
> Motor Components
> Basic kegerator conversion kit keg beer tap bck-nt
Basic kegerator conversion kit keg beer tap bck-nt
Basic Kegerator Conversion Kit
Enlarge Basic Kegerator Conversion KitEnlarge Image
The Basic Kegerator Conversion Kit allows you to specify many of your own components so you can create a custom draft beer set up.
The Basic Kegerator Conversion Kit allows you to specify many of your own components so you can create a custom draft beer set up. Note: Coupler, regulator and CO2 tank not included.
BASIC KEGERATOR CONVERSION KIT COMPONENTS
1. 5 Feet of 5/16" Air/Co2 Line Assembly. The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design. Reusable plastic clamps make it easier to swich out taps or for cleaning.
2. 5 Feet of Beer Line Assembly.
3. 4-1/8" Long Shank with Nipple Assembly. This shank is 4-1/8" long measured from the end of the threading to the end where the faucet attaches. A shank is used to attach a beer line to a faucet. The shank is mounted through a 1" hole in a wall, refrigerator door, cabinet, etc. The shank comes with a black flange on the front and a compression ring on the back. The compression ring is used to secure the shank to the mounting surface. All shanks come fitted with a tail piece for beer line connection.
5. Comes with Black ABS Plastic Faucet Knob.
6. 1 Neoprene Washer. Washer is placed between keg coupler and beer line assembly. The purpose of this washer is stop any beer from leaking out the top of the keg coupler.
7. Standard Specialty Faucet Wrench.
8. Detailed Instruction/Installation Manual.
