Greco brothers 4 station aqueous washer

____________________ > Ava > System components > New Style > Motor Parts > Electric Motor Parts > Greco brothers 4 station aqueous washer - all ss constr

Greco brothers 4 station aqueous washer - all ss constr

Greco 4 Station Aqueous Washer All SS Construction
Greco Brothers 4 Station Aqueous Washer
Station 1 & 2: 8" deep x 18" x 16"
Station 3: 1 3" deep x 16" x 16"
Station 4: 17" deep x 16" x 16" (Dryer)
* This unit is brand new - Never used!
* Overall Dimensions: 9' Long x 3' Wide
* All Stainless Steel Construction
* 3 Pall Cartridge Filters, one for each station
* Oil Seperators and dams for reverse cascading
This machine could be used for passivation as well as cleaning. All Stainless steel construction is perfect for passivation.
Greco Brothers Inc. is still in business and making parts washers! The info below is taken from their web site and reflects their techniques and systems. Ours is similar and made by them.
Greco Brothers is a leading manufacturer of aqueous and solvent-based industrial parts cleaning systems located in Providence, RI. Our major product lines include ultrasonic cleaning systems, aqueous degreasers, deionized water rinsing systems, hot air parts dryers, and vapor degreasers.
Our custom-fabrication service is not limited to building special cleaning systems however. We custom design and custom build a wide variety of products in stainless steel and carbon steel. Visit our Custom Fabrication Page for our fabrication capabilities.
We appreciate you taking the time to visit our site. Please feel free to browse through our product information and call or e-mail us with your inquiries.
1 Greco Lane, Providence, RI 02909
[Ultrasonic Cleaning Bench] Greco Brothers Aqueous Cleaning Systems are the product of 50 years of custom engineering experience and technical expertise.
We have designed systems that harness water's tremendous power and utilize it to its fullest potential. From the initial cleaning station to the final rinse, water is constantly at work cleaning your parts and doing away with all foreign matter.
So, whether your cleaning requirement is the removal of heavy grease, light oil, or dust and fingerprints, let us show you why water is the natural cleaning solution.
TYPES OF AQUEOUS CLEANING SYSTEMS
Aqueous degreasing is a method of removing light oils from the work piece utilizing special equipment with a water-based, biodegradable cleaning compound. Depending on the cleaning compound chosen, the oil can be either emulsified or split to the surface. From the surface, it is skimmed to a separation compartment, where it is isolated from the cleaning area. Continuous filtration and liquid agitation is provided to aid in the cleaning process. Aqueous degreasing is most appropriate for cleaning parts that are contaminated with light oils, or as a preliminary cleaning operation prior to ultrasonic cleaning. For further details, see our aqueous degreaser literature.
In order to produce spot-free drying, the parts must be thoroughly rinsed after the cleaning operation.
[counterflow rinse] Multiple Compartment Counterflow Rinse: Counterflow rinsing (C) is the process of flowing rinse water through multiple rinse stations in the opposite direction of the workflow (i.e., utilizing the overflow from the final rinse tank as the input source feeding the rinse tanks before it). A multiple compartment counterflow rinse system may use the same amount of water as a single overflow rinse, regardless of the number of compartments. By flowing the water in the opposite direction of the workflow, the contaminants are isolated and directed to the drain or recycler. This results in the work piece being introduced to successively cleaner rinses as it passes through the process.
Deionized Water Rinsing: The lower the mineral content in the rinse water, the less likely it is that the work pieces will stain during the drying process. Depending on the quality of the local water supply and the critical nature of the particular part being cleaned, deionized water rinsing may be necessary. Our recirculating deionized water rinse stations remove the minerals and organic matter from tap water and recirculate it through either of the rinse station configurations described above. For further details, see literature depicting our deionized water rinse system, or our closed-loop recirculator/deionizer.
Most applications require that the work piece be dry before it proceeds to the next manufacturing step. Greco Brothers offers a broad selection of Hot Air Drying Systems. All of our dryers are constructed of insulated stainless steel, and designed to be energy efficient while maximizing production capacity. For difficult applications, such as work pieces that contain many complex cavities, we manufacture a full line of liquid displacement dryers.
For complete details, see our hot air drying systems or displacement drying systems literature.
Consolidated Bench Construction
Each of the required cleaning, rinsing and drying systems may be purchased and installed individually; however, consolidated construction offers several advantages over the single station approach.
All of the equipment in a consolidated bench is built into a common frame and wired to a common electrical box. Whenever possible, water inlet and drain manifolds are utilized to further simplify the installation.
Automation is always available with our cleaning benches. A user-friendly, programmable transport system picks up the part, carries it through the cleaning process, and drops it off; leaving no room for human error.
At Greco Brothers, we construct our benches with particular attention to durability and ease of use. The framework and countertop are fabricated from 300 series stainless steel. A recessed control panel offers easy access, while protecting the controls and displays from inadvertent contact. Drain-back trays are built into each countertop between stations to ensure that any dripped liquid is contained and directed back to the appropriate station. Sliding doors on the front of the bench allow easy access to all components. And should it ever be necessary, the entire countertop can be removed without disconnecting the work stations.
Best of all, because Greco Brothers CONSOLIDATED CLEANING BENCHES can be custom built to include only the cleaning, rinsing and drying systems your process requires, you're never forced to overspend. For more information on our consolidated cleaning benches, see our ultrasonic page
So whether you need a single cleaning tank, or a closed-loop cleaning bench with a programmable transport system, call Greco Brothers and discover why water is the natural cleaning solution.