____________________ > Aurora
> System components
> Old Style
> Motor Components
> Gasoline Motor Component
> 3 hydraulic portable tools, saw, breaker, compressor
3 hydraulic portable tools, saw, breaker, compressor
1. A Hydraulic High Performance Air Compressor
2. A Hydraulic Mobile circular Concrete Saw with Cart
3. A Hydraulic Pavement Breaker/Tamper A second Breaker/Tamper is included, no bit or whip hoses but same condition
These tools will all run from a Bobcat, Cat, John Deere, Case, New Holland, Kubota skid steer or tractors existing hydraulic system if they have an auxillary hydraulic connection for an attachment. These tools connect in the same spot and will run from the auxillary hydraulic system! Just add a pair of duel braid hydraulic hoses to run these from a skid-steer, loader backhoe, excavator or tractor. These are also common rented tools for use sometimes under water or in very wet conditions. No gas engine to wear out, no exhaust and little noise compared to the gas engine tools.
1. Hydraulic High Performance mobile Air Compressor
Operates on 7-10 GPM of flow at 1000-2000 PSI rotating at 1400 rpm.
It weighs around 185 lbs, it does not have wheels on the bottom. 2 quick connect fittings also included.
It has a pressure regulator, cooling fan, and a pulsation tank for better performance.
It s operating output at a continuous 100psi at 22 CFM free air flow.
2. Hydraulic Mobile circular Concrete Saw with Cart
Operates on 7-14 GPM of flow at 1200-2000 PSI rotating at 5100 rpm.
The Saw alone weighs about 19 lbs detached from cart, Total together weighs about 40 lbs.
The 14 circular abrasive blade with 1 arbor cuts to 5.25 in concrete. The blade guard is adjustable. There is a wet hose connection for wet cutting.
10 whip hoses with quick connect fittings are included, The cart has an adjustable depth setting for cutting
3. Hydraulic Pavement Breaker/Tamper (a second one by itself is included)
Operates on 4-7 GPM of flow at 1200-2000 PSI, hits at 1500 BPM
This Breaker/Tamper weighs about 43 lbs but operates like a 50 lb. air breaker, great performance for its size and weight
18 whip hoses, quick connect fittings and rubber handles positioned for minimum operating fatigue
The tool size is 1 x 41/4 shaft, a 5 tamper pad is included shown in picture
