____________________ > Aurora
> System components
> Old Style
> Berko HUHAA748 480VOLTS 7.5KW 9AMPS 3PH
Berko HUHAA748 480VOLTS 7.5KW 9AMPS 3PH
Wide range of optional control kits are field installable, increasing the HUHAA adaptability to the specification market.
Forced air unit heater with 10 power ratings; from 3kW to 50kW heating output; 208, 240, 277 and 480V; 10,230 to 170,500 BTU/hr.
32 compatible models (no need to try to assemble a heating system from 70 or 80 models).
Heavy gauge die-formed steel housing.
Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation.
Specially designed venturi outlet to meet that added throw as required in vertical position.
Branch circuit fusing (when required).
1 or 3-phase wiring on 5 through 10kW 208/240V and 15kW 208V units (field interchangeable).
24V control transformer standard on most models, providing a safer and more accurate means of temperature control. 3kW and 5kW 208-277V, have line voltage controls as standard (24V control available on made-to-order basis).
Automatic reset linear thermal cut-out, capillary type, provides protection over entire length of element areas (Manual reset protection available on made-to-order basis).
2-speed fan selector switch (25 to 50kW models).
Fan delay feature eliminates cold drafts.
Element heats up before fan cuts in, then fan continues to distribute heat after element shuts off.
Individually adjustable discharge louvers to control air flow.
wall bracket included part # HUHAAB10
thermostat and disconect availble but not included!!!
