____________________ > Aurora
> System components
> New Style
> Motor Parts
> Diesel Motor Parts
> 2 sensormatic ultra post ii 2 towers anti theft system
2 sensormatic ultra post ii 2 towers anti theft system
SENSORMATIC ULTRA POST II 2 TOWERS ANTI THEFT SYSTEM PLUS 2 ULTRA POST SHIELDS
Two tower system plus two shields... This is a two post anti-theft system removed from a movie rental store. In mint and working condition. The store was open for less than 3 years. I tested the system. Unit is self-operating and requires no external controller. Unit operates on 110V and is ready to plug in and go. Includes a data wire to run the 2nd tower. Includes two shields. Some anchor bolts included. Installer will need to supply the anchors to mount the towers to the floor. Very easy to install!!
1 Primary Transceiver Antenna tower
1 Secondary Transceiver Antenna tower
1 Data wire to secondary tower
The Ultra*Post detection system is made up of a Primary pedestal and, typically, a Secondary pedestal. The Primary pedestal contains all the components necessary to operate on its own - transmitter, receiver, audible alarm, visual alarm and power supply. By itself, the Primary pedestal creates a detection field of 0.9m (3 ft.) on both sides. The Secondary pedestal operates in conjunction with a Primary pedestal. It does not contain power, audible alarms or visual alarms. The Primary/Secondary (dual) configuration provides up 1.8 m (6 ft.) of coverage between pedestals.
Ultra*Post Shield is an accessory that can be mounted behind an Ultra*Post to reduce the detector's backfield. The reduction allows tagged merchandise to be placed closer to detectors. The Shield installs on new or existing Ultra*Post detectors at 15 cm (6 in.) from the detector. The unit offers maximum backfield protection without obscuring the Ultra*Post alarm light.
(HxWxD) 142 x 61 x 21 cm (56 x 24 x 8.5 in.)
I can deliver up to 300 miles for additional $250.
