____________________ > Auburn
> System components
> Old Style
> Tools
> Hand tools
> Controlotron stormmeter 1010 clamp-on flowmeter
Controlotron stormmeter 1010 clamp-on flowmeter
THIS IS SURPLUS FROM A LOCAL GOVERNMENT AGENCY.
IT'S IN GOOD USED CONDITION WITH SOME COSMETIC WEAR. THE FOAM INSIDE THE CASE IS COMING OUT, OTHERWISE JUST EXPECT SOME SCUFFS AND SCRAPES.
THE OWNERS MANUAL AND ALL OF THE OTHER ACCESSORIES SHOWN ARE INCLUDED.
2 CONTROLOTHON, 1010 TRANDUCERS. PART # 1011PPS-E2
CONTROLOTRON 1011TS THICKNESS GAUGE .100 - .500 ALONG WITH NTHE CONNECTION ADAPTER #1015AT.
ALSO INCLUDED IS THE CABLE "1012CWP" THIS HOOKS UP TO THE FLOW XDCR PORT.
GUARANTEED IN GOOD WORKING CONDITION.
System 1010 offers a choice of optional functions, which are frequently required in Portable Flowmeter applications. Basic Single or Dual Path/Channel Volumetric Flow measurement quickly converts to Mass Flow based on either 1010's ability to derive liquid density from the liquid's measured Sonic
Propagation Velocity or from an external 4 to 20 mA density signal. The built-in Pipe Wall Thickness Gauge, with resolution of .001" or .1mm, permits accurate Site Setup and performance. 1010's Flaw Detection capability identifies pipe defects which can affect meter operation and which could present a danger of future pipe leakage.
For applications involving liquids which contain considerable reflective matter or gas bubbles, 1010's built-in Reflexor Flowmeter, successor to the award winning Controlotron System 190, can be activated to obtain needed flow data.
1010 computes HVAC Thermal Energy from flow rate and heat exchanger temperature drop, measured via its RTD sensors. Dual 4-20 mA analog data inputs may be used to input pressure, density, temperature and viscosity data for special optional functions, when required.
View Raw Image
View Raw Image
View Raw Image
View Raw Image
View Raw Image
View Raw Image
