____________________ > Auburn
> System components
> Old Style
> Hydrolic Components
> Lowe presure Components
> New supercool swedish thermo-electric cooling (kit) ( )
New supercool swedish thermo-electric cooling (kit) ( )
You are Purchasing a complete kit to convert a cooler or small insulated box to a refrigerator, Patio Cooler, or Kegerator
Cooler shown in Picture is not included. The cooler I used was a 64 Quart Coleman Extreme, it can hold 3.5 cases plus ice. With the low profile of the TEC I think I can get about 4 cases in it and still get to 15 degrees Fahrenheit. It will freeze beer, that's why I have it on an appliance timer to cycle it on and off at about 15 minute intervails. Temperature dependent on size of box, insulation, and ambient temp or environment outside of box.
* One TEC (thermoelectric cooler) Model -Supercool AAC150-24-22-00-ST (NEW)
* Power supply- 24 VDC , 20 Amp (NEW)
* Power cord with connectors, 3 prong AC
* Appliance Timer to control cycle time on/off
* 2ft Wiring and connectors from power supply to TEC unit Power supply must be mounted within 2 ft of cooling unit.
* Instructions, and technical support to get your unit up and running.
I have only used mine to chill cans but as I said it gets down to 15 degrees. and I'd bet this cooler is big enough for a pony Keg., I seen an ad where someone is selling Haier Kegerator Beer Refrigerator that doesn't cool which would be perfect for this kit. Note: You have to have the tools to be able to cut the hole for the TEC in the side of what ever you are putting it in, for the cooler I just used a utility knife.
* Thermoelectric Cooler
* Thermoelectric Module
* Peltier Junction
It has 3 fans, and 2 thermo couplers built in
Can be set to cool a small insulated box to approx 15 Degrees Fahrenheit or reverse polarity and it becomes a heater.
Brand New in original box never used. Originally purchased at bulk rate for $575.00 from the manufacturer.
Dimensions - 19" X 8" by 7" Deep, Weight is about 20 lbs.
THERE ARE 16 Peltier semiconductors inside each unit 8 doubled up in series, and then all wired in parallel to get the 24 vdc.
Thermo-Electrics are highly reliable, because they have no moving parts like compressor styling cooling, the only moving parts are the Fans which are not quiet, but they are the brush-less which are highly reliable.
All components are NEW, everything needed to connect wiring and power up is included but you will need some screws to secure components to what ever you are converting, sheet metal or wood screws should work but that is something you need to supply.
I am available to answer any questions you have please call, (***)-224-4204
