____________________ > Auburn
> System components
> Old Style
> Hydrolic Components
> Lowe presure Components
> Bush hog 176-10' severe duty 3-pt rear blade w/3 hyd's
Bush hog 176-10' severe duty 3-pt rear blade w/3 hyd's
Brand New Bush Hog Model No. 176-10, 10' Wide, 3-Point Mounted Rear Blade with 3-Way Hydraulic Adjustments.
We sell Bush Hog Products with Confidence ! Bush Hog is a Proven Brand - You won't be Taking any Chances with Bush Hog Products! Expect This Bush Hog Blade and ALL of the Equipment we Sell to be Top Quality Equipment that will Serve you well for a Lifetime, and Provide a Great Resale Value Too!
Price is for a Complete Bush Hog 176-10' Rear Blade which Includes the Following:
* All 3 Cylinders, Pins, Clips, Hoses & Hose Tips.
* Blade is Rated for 2WD Tractors up to 175 HP & 4WD Tractors up to 140 HP.
* Good for Category 2 or 3 Hitches & it's Quick Hitch Compatible.
* Blade Weighs 1408lb's w/o the Cylinders, and 1590lb's with all 3 Cylinders!
* 5" Diameter King Pin is the LARGEST!
* Bush Hogs Moldboard Spec's are GREAT!
* TALLEST Moldboard at 20" High!
* Cutting Blade is made with Carbon Steel;
* Reversible Blade with factory Bevel on Both Sides.
* 3-Way Adjustments are as follows;
* 0 to 45 Degrees (Horizontal Rotation).
* Swing Angle Cylinder is 4" dia x 16" Stroke & 2" Shaft.
* 0 to 39" Left or Right.
* Offset Cylinder is 4" dia x 16" Stroke & 2" Shaft.
* 0 to 15 Degrees Up or Down.
* Tilt Adjustment Cylinder is 4" dia x 4-1/2" Stroke & 1-1/2" Shaft.
* Blade has an Extra Long Boom to Accommodate the full 360 degrees of Blade Rotation.
* Mechanical Linkage for Tail Wheel.
* Hydraulic Cylinder Kit for Tail Wheel.
Plus We Are Glad To Say Bush Hog Blades Are MADE IN THE USA!!!
