____________________ > Auburn
> System components
> New Style
> Tools
> Power tools
> New yellow jacket ratcheting tube bender 60331 in box
New yellow jacket ratcheting tube bender 60331 in box
Yellow Jacket Ratcheting Tube Bender 60331 New in Box
Yellow Jacket Ratcheting Tube Bender 60331
The original one hand bending tool for soft copper, aluminum and light wall hydraulic tubing from 1/4" to 7/8".
* Bending shoes change quickly. Trouble free ratchet mechanism. Bend 3/4" tube to 90 in less than 10 seconds
* Index marks ensure bending to length
Complete swing bender kit includes all items shown to bend 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8" tubing per case plus a small cutter for 1/8" to 1-1/8" O.D. tubing and a tube reamer.
Tips for accurate bends: Set location of bend along a tube length, look at top of the bending mandrel. There are two index marks about 1.25 inches apart. Mark your tubing with the length of the leg you want. Example: You want a 24" leg on the left side of the bend. Mark the tube 24" from its end. Align your mark with the line on the RIGHT side of the mandrel. Likewise if you want the leg on the right to be 36 inches long, align your mark 36" with the mandrel's LEFT side index mark.
One-handed bending tool for soft copper, aluminum and light wall hydraulic tubing
Bend 3/4" tube to 90 in less than 10 seconds
Trouble-free ratchet mechanism
Index marks ensure bending to length
Includes a reamer and pipe cutter
WE ARE NOT RESPONSIBLE FOR ANY TARIFF CHARGES OR SURCHARGES ISSUED BY YOUR COUNTRY.
