____________________ > Auburn
> System components
> New Style
> Motor Parts
> Gasoline Motor Parts
> New construction master pro builders calculator
New construction master pro builders calculator
NEW! Construction Master Pro Builders Calculator
Work Smarter, Build Better, and Improve Your Bottom Line!
We've taken the best features of the original Construction Master IV, added some useful new "Pro" functions, and made it even easier to use! An essential jobsite "tool." It's the most complete Builder's Calculator on the market!
The Construction Master Pro calculator was designed specifically for builders, general contractors, construction foremen or superintendents, carpenters, framing contractors, concrete/foundation contractors, remodelers and other construction pro's.
You no longer have to deal with tedious or repetitive calculations-common building formulas are built in, so you don't have to remember them!
* Dimensional Math and Conversions
Work Directly in Feet, Inches, Fractions, Yards and Metric
1/2, 1/4, 1/8, 1/16, 1/32, 1/64's
* Regular and Irregular Hip/Valley Rafter Lengths
* Regular and Irregular Jack Rafter Lengths
* Complete & Enhanced Stair Riser/Tread Solutions
* Board Feet/Lumber Estimation
* Six Material Estimation Functions
Block, Brick, Column, Cone, Footing, Roof
Ascending or Descending Lengths
* Plumb, Level and Cheek Cut Angles
* Improved Rake Wall Function
* D:M:S to Decimal Degree Conversions
* Acres, Kilograms, Pounds, Tons and Metric Tons Conversions
"I bought my first Construction Master because I was starting a new job in a different country, and all the roofs were to be hand cut. The calculator has saved me immeasurable amounts of time in my job as an estimator, carpenter, and proprietor of my own business. I find that the whole calculator is very useful; all the keys have built in formulas. They shave off countless hours when estimating, cutting roofs, squaring up buildings, etc. I have actually gone out and purchased a Construction Master for employees. As far as recommending goes, I would, only that my competitors might find out my secrets of cutting roofs so fast and accurately."
"I use it on every house. I just tote it like I do nails in my nail apron. You really need one if you are going to put rafters on a house. It's just highly invaluable. You figure up the measurements one time and you cut the rafters. You don't have to check them. It's right."
"It's user friendly. The keys are all self-explanatory. Real easy to find and easy to operate. I would say it's definitely worth the money. Go ahead and purchase it 'cause it will save you a lot of time."
5.6 x 3.0 x 0.6" (142.2 x 76.2 x 15.2 mm)
Product Weight (Including Case and Pocket Reference Guide)
Two 1.5-Volt Alkaline Batteries (LR-44/A76)
Approx. 1-2 years of actual usage
42 keys, soft-touch silicone rubber
36 pp.; 2.4 x 4" (60.9 x 101.6 mm)
LCD segment; 11 digits (7 normal, 4 fractions), with annunciator-legends
