____________________ > Auburn
> System components
> New Style
> 2 tap kegerator conversion kit keg beer 2SCK-5T w/ tank
2 tap kegerator conversion kit keg beer 2SCK-5T w/ tank
Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank
Enlarge Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 TankEnlarge Image
The Standard Double Keg Kegerator Conversion Kit comes with everything you will need to successfully convert your refrigerator or chest freezer into a two product draft beer cooler. This keg tap kit is designed to run two completely separate kegs. Depending upon your refrigerator capacity, you can run 2 full size kegs, 2 pony kegs, 2 6 gallon kegs or any combination you choose. All the draft beer parts are of the highest commercial grade quality which are designed and built to last.
Our keg tap conversion kits come complete with detailed instructions and are supported by our friendly and experienced product specialsts. You can count on them for personalized attention both before and after your purchase.
STANDARD DOUBLE KEG KEGERATOR CONVERSION KIT COMPONENTS
2. Commercial Grade Gauge Co2 Regulator with Co2 Splitter. This commercial double gauge regulator is a very high quality regulator at a incredible price. This commercial regulator works with any Co2 Tank with a CGA-320 valve. This Double Gauge regulator measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The large turn handle in the center is used to easily adjust the output pressure. This regulator features a Y splitter and two shut off valves on the house out barbs.
4. Two KT85D-L American "D" System Sankey Lever Handle Couplers. This is a commercial grade lever Handle keg coupler. The KT85D-L is compatible with all domestic brand kegs. This keg tap works with all American "D" system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg.
5. Two Separate 5 Foot Long Beer Line Assemblies.
6. Two 4-1/8" Long Shanks with Nipple Assembly. This shank is 4-1/8" long measured from the end of the threading to the end where the faucet attaches. A shank is used to attach a beer line to a faucet. The shank is mounted through a 1" hole in a wall, refrigerator door, cabinet, etc. The shank comes with a black flange on the front and a compression ring on the back. The compression ring is used to secure the shank to the mounting surface.
7. Two Chrome Plated Faucets with Brass Lever. This premium quality faucet features a forged brass body with a highly polished chome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
8. Two Comes with black ABS plastic Faucet Knobs.
10. Two Neoprene Washers that are placed between the keg couplers and the beer line assemblies. The purpose of these washers are to stop any beer from leaking out the top of the keg couplers.
11. Standard Specialty Faucet Wrench
