____________________ > Auburn
> Electronic components
> Old Style
> Hazproof tingley boots size 11 orange steel toe
Hazproof tingley boots size 11 orange steel toe
HazProof Tingley Boots Size 11 Steel Toe Orange
This is for 1 pair of used HazProof Tingley boots size 11. Please check out the photos for an example of the boots you will receive. They have lots of black scuffs marks and bottoms of boots do show wear. The size of each boot is written on the side with black marker. They even blacked out one of the boots sizes with a marker. They still have tons of life left in them. They are Made in the USA! Let me know if you have any questions.
THIS IS THE LAST PAIR OF HAZPROOF BOOTS!!
* Provides 100% liquid proof protection
* Smooth exterior surface for easy decontamination
* Resistant to hazardous waste
Tingley HazProof Boots are made of special polymer material, they are ideal for chemical and hazmat cleanup. Sure grip outsole provides excellent abrasion and slip resistance. HazProof Boots are designed with a large foot area to accommodate the extra bulk of an encapsulated suit providing a comfortable fit. Boots have a bright orange color for high visibility and a steel shank firm arch for superior support.
These boots are not only comfortable, they meet the protective footwear chemical permeation requirements of NFPA 1991 Standard on Vapor Protective Ensembles for Hazardous Materials Emergencies 2005 Edition. The HazProof boot has also been tested to Military Standard 282 and will provide protection against certain chemical warfare blister and nerve agents!
Tingley HazProof Boots surpass the following NFPA Requirements:
ASTM F 739 - Permeation Resistance
MIL-STD-282 - Permeation Resistance
ANSI Z 41 PT99 EH - Exceeds Protection Minimum Upper (Height)
ANSI Z41 PT99 PR - Puncture Resistance Sole and Heel
ASTM D 1630 - Abrasion Resistance Sole and Heel
ANSI Z 41 PT99 M I/75 - Toe Impact Resistance
ANSI Z41 PT99 M C/75 - Toe Compression Resistance
ASTM F 1790 - Cut Resistance Upper
NFPA 1991-2005 - Ladder Shank Bending Resistance
Meets ASTM F 2413-05 M/I/75/C/75 for steel toe impact and compression, and Electrical Hazard Protection**.
**Boot shall withstand 14,000 volts at 60 HZ and the current leakage shall not exceed 3.0 milliamperes.
Electrical Hazard soles and heels are intended to reduce the hazards due to accidental contact with live electrical circuits, electrically energized conductors, parts or apparatus. Electric Hazard soles and heels are not intended for wear in those work environments where volatile chemicals or explosives may be present, where conductive footwear is required.
Warning: Electric Hazard features of the soles and heels, will deteriorate in wet environments and when worn with excessive wear on the soles and heels.
