____________________ > Albion
> System components
> Old Style
> New transonic H9XL probe & board, brand
New transonic H9XL probe & board, brand
Transonic H9XLD probes & board, brand new.
XL-Series Flowsensors can be calibrated and programmed for up to 4 different fluid / temperature / tubing combinations and will work with most flexible tubing types. Sensor size is determined by outside diameter of the tubing.
Unmatched accuracy & resolution
Calibration is dependent on tubing material, wall thickness, ultrasound velocity of the liquid flowing through the tube, and temperature.
* 1) Absolute Accuracy is composed of zero stability, sensitivity and linearity errors. Stated values apply when flow rate is greater than 5% of maximum range and zero offset is nulled
* 1b) If the sensor is calibrated on-site for the tubing and liquid in use, absolute accuracy is further improved to the value listed as "Relative Accuracy."
* 1c) On-site calibration is recommended if the sensor is routinely used to measure flows less than 5% of the maximum range to account for non-linearities associated with flow profile.
* 2) Resolution represents the smallest detectable flow change at 0.1Hz filter (average flow output).
* The board that comes with it is Part # is BFPT1004-008 on label, board is marked AFPT1004-008, Rev A
* It does have a document with it, but I wouldn't call it a cal certificate. It is titled Meter History Record, and looks like mfg check out sheet verifying compliance to standards
Over $1,800 for Transonic, see my price.
