____________________ > Albion
> System components
> Old Style
> Motor Components
> Okuma LC40-m atc 50 tool changer, live tooling
Okuma LC40-m atc 50 tool changer, live tooling
THIS MACHINE IS AN OKUMA LC40-M ATC, 5 AXIS SIMULTURN, SIMILAR TO THE NEW MACTURNS RETAILING AT APPX $375K
IT INCLUDES A 50 TOOL ATC CHANGER FOR 50 TAPER TOOLS, SEVERAL TOOLS INCLUDED
MACHINE IS IN EXCELLENT CONDITION, AND WAS POWERED DOWN 3/30/10
UPPER TURRET IS 4 POSITION, AND INCLUDES A STATIC TOOL PLUS FEED FROM THE 50 TOOL SIDE MOUNT ATC
LOWER TURRET IS 8 POSITION. CONTROL IS AN OSP5000LG WITH FULL GRAPHICS AND RS232 INTERFACE
WAYS ARE VERY GOOD, AND THE MACHINE IS HOLDING TOLERANCE WELL, IT IS JUST TOO BIG FOR THE PREVIOUS OWNER
MACHINE WEIGHS APPROX 55,000 POUNDS, AND IS A TRUE 5 AXIS MACHINE INCLUDING FULL C AXIS
ALL AVALIABLE MANUALS ARE INCLUDED AND ALL TOOLING PICTURED ARE INCLUDED
MACHINE IS FOB OUR PLANT IN OXNARD, CA, AND WILL BE UNDER POWER AND AVAILABLE FOR INSPECTION AFTER 4/2/10
YOU CAN AVOID THE EXPENSE OF COSTLY LIVE TOOLS BY RUNNING THE ECONOMICAL 50 TAPER HOLDERS, PLUS HAVE GREATER CAPACITY
THIS IS MADE FOR PRODUCTION TURNING PARTS UP TO 23.6" DIAMETER. TAILSTOCK INCLUDED.
MACHINE IS FOB OXNARD, CA, AND SALES TAX APPLIES FOR SALES WITHIN CALIFORNIA UNLESS A VALID CALIFORNIA RESALE ID IS PROVIDED
