____________________ > Albion
> System components
> Old Style
> Hydrolic Components
> Low presure Components
> Workshop heaven shield technology corrosion control kit
Workshop heaven shield technology corrosion control kit
Five best selling Shield Technology Products, one fantastic price!
The Shield Technology Corrosion Control Kit consists of:
250ml Restore Rust Remover (makes 5 litres)
A water-based, non-acidic, non-toxic, biodegradable derusting concentrate. The contents of the 250ml bottle, when mixed with plain tap water makes 5 litres of working strength fluid. Because it does not contain any acids, only the rust is removed, leaving good metal undamaged. (Products that contain phosphoric acid will remove both the rust and a certain amount of good metal which may not be desirable). Because of the absence of acids, there is no danger of flash rusting occurring when parts are removed from the bath. In fact, parts will remain rust free without further protection for a considerable period, allowing plenty of time for painting, chemically blackening, or plating parts or tools. Alternatively, to give longer protection in the bare , cleaned state, they may be protected with MetalGuard Ultra, GreaseXtra or ToolGuard VCI. The derusting solution may be used over and over again until the solution becomes blackened and the reaction time becomes excessively slow. Because the residue is completely biodegradable the spent solution may be flushed down the drain without harm to the environment. Litre for litre, Restore Rust Remover is the most economical product of its kind available.
125ml MetalGuard Ultra Anti-Rust Coating
MetalGuard Ultra is a high specification thin film coating which leaves a 2 micron clear film which will not yellow with age. It contains both ferrous metal and yellow metal corrosion inhibitors. Supplied as a liquid it can be applied by brush, spray or dipping. Unlike the majority of other thin film coatings available on the market, it complies with defence standard 68-10/2 (PX24) and NATO CODE C-634 which is indicative of the quality of the product. Under typical workshop conditions it can be expected to provide protection for up to two years. MetalGuard Ultra does not contain silicone.
125ml HoneRite Gold Water Additive (makes 3 litres)
HoneRite Gold is a universal grinding, honing and lapping additive that makes water non-corrosive. It is supplied as a concentrate and is added to water, protecting both the machine and anything in the vicinity that may get splashed. It is highly recommended for use with all makes of powered water stone grinder eg. Tormek, Scheppach, Jet, Delta, Shinko etc. It can also be used with Japanese water stones. If you use oilstones rather than diamond or waterstones, we can switch the HoneRite Gold for HoneRite No.1 oilstone fluid. Just let us know.
The latest corrosion inhibitor to be added to the Shield Technology range, designed specifically for the woodworker but which is rapidly finding new uses by metalworkers and model engineers. ProtecTool wax is unique. It is a soft blend of microcrystalline waxes and corrosion inhibitors that hardens on exposure to air. It is applied with a soft cloth, allowed to dry for a few minutes and then buffed (just like shoe polish) and building up several thin layers is much more effective than one thick one. In addition to protecting tools such as hand planes and saws, and machine tables it reduces friction dramatically.
Pack of 3 ToolGuard VCI emitters
ToolGuard VCI is a vapour phase inhibitor for protecting tools and tooling stored in drawers and toolboxes and manufacturers packaging. The VCI chemical is absorbed into a felt pad inside a 35mmm dia. lidded plastic pot. On removal of the lid, the VCI chemical permeates the enclosed volume forming a monomolecular protective layer on every surface; be it steel, iron, wood, plastic etc. Because it is a vapour, it will find its way into every nook and cranny.
ToolGuard VCI works at up to 100% RH and is effective for 12 months in a volume of 2 cubic feet. They are ideal for protecting precision measuring equipment, collets, hand tools and machine accessories. Because it does not lower the level of humidity, like silica gel, it will not distort any delicate pieces of a model made from wood - which moves with changes in humidity. ToolGuard VCI has found many applications other than those just listed. Museums use them to protect artefacts in display cabinets, the shooting fraternity have used them with great success in gun cabinets, and woodworkers use them for protecting valuable hand tools.
For related magazine articles please click here and here
Reproduced with kind permission of the publishers; Good Woodworking Magazine, Issue 205 & Watercraft Magazine, Issue No. 71.
Workshop Heaven are main distributors for Shield Technology products as well as Ashley Iles Edge Tools, Clifton Planes, Gyokucho Saws, Bahco Tools, Gransfors Axes and so much more.
To add Workshop Heaven to your favourites list please click here
