____________________ > Albion
> System components
> New Style
> Hyd mech 10" manual cold saw P250 1HP 230V msrp $2500
Hyd mech 10" manual cold saw P250 1HP 230V msrp $2500
HYD MECH 10" MANUAL COLD SAW 1 HP / 230 VOLT / 3 PHASE
THIS SAW APPEARS TO BE SLIGHTLY USED IN GOOD CONDITION.
THE MACHINE WAS WIRED UP BUT THE CONTROL BOX BUT IT DOES NOT OPERATE WITH THE SWITCH CONTROL.
WE WIRED THE MOTOR DIRECTLY AND LET IT RUN FOR 15 MINUTES WITH NO ISSUES SO THE MOTOR RUNS FINE.
PLEASE REFER TO THE VIDEO TO WATCH THE MACHINE OPERATE.
THERE ARE SOME ISSUES WITH THE CONTACTOR CIRCUIT CONTROLS AND WILL NEED MINOR REPAIR OR REPLACEMENT OF COMPONENTS
INCORRECT VOLTAGES ON THE OUTPUT OF THE CONTROL TRANSFORMER
INCORRECT VOLTAGE ON L2 OUTPUT ON THE CONTACTOR ( TESTED L1, L2, L3 FOR 120V)
* Metal base with coolant tank
* Manual saw head and vise movement
* IP55 control handle with switch
Rectangular Hollow 90 : 3-1/2" x 1-3/4"
Round Hollow 45 : 2-1/2" (left)
Rectangular Hollow 45 : 2-3/4" x 1-3/4" (left)
Rectangular Solid 90 : 1" x 1"
Rectangular Solid 45 : 3/4" x 1" (left)
or any freight carrier of your choice. They will require the following information:
4) Type of delivery location. (Residential, With Loading Dock, or Without Loading Dock)
You also have the option of picking up at a local terminal.
