____________________ > Albion
> 220 ohm 2 watt carbon comp resistor non inductive
220 ohm 2 watt carbon comp resistor non inductive
Note: These are brand new resistors as shown in the picture. After manufacturing 1 1/2" flexible leads were attached with a Molex-type tab attached to one end and a female pin connector is crimped to the other end. Heat-shrink tubing was used over the connection at the resistor body. The overall length of the resistor body and usable wire (not including the connectors) is 5 inches. Of course you can cut off the connectors and use the flexible wire as the leads.
