____________________ > Abingdon
> System components
> Old Style
> Motor Components
> Electric Motor Components
> New 36" pallet forks 2300LB & top and bottom bar
New 36" pallet forks 2300LB & top and bottom bar
AND THE TOP AND BOTTOM HARDENED STEEL BARS
- Perfect for a welder or fabricator. These are the critical parts needed to build your pallet fork attachment! Weld these bars to your bucket or one of your existing attachments and you can add and remove the pallet forks as needed!
-THIS BRAND NEW Pair of pallet forks have a capacity of 1155lb each or 2310lb for the pair
- The Top and Bottom Bars are laser cut from 1/2" thick Hardened Steel!
- The Top and Bottom Bars are 45" long and are the standard with of pallet fork attachments and the standard with of quick attaches for skidsteers and tractor front end loader quick connects.
- The forks are 3.15" WIDE X 1.18" THICK X 36" LONG.
- This PAIR OF ITA CLASS 2 FORKS will fit any standard ITA frame with a distance of 16" from top of the upper rail
to the bottom of the lower rail.
- Each fork weighs 71 lbs or 142 lbs for the pair.
- We have quite a few of these forks in stock. The forks have some surface rust from outside storage that is not shown in the photo.
THE PALLET FORK ATTACHMENT IN THE PHOTO BELLOW IS NOT INCLUDED. THE PHOTO IS FOR ILLUSTRATION OF HOW TO USE THE INCLUDED TOP AND BOTTOM BARS.
