____________________ > Abingdon
> System components
> Old Style
> Motor Components
> Clear-com RM702 remote intercom station, 2 channel
Clear-com RM702 remote intercom station, 2 channel
Clear-Com RM702 Remote Intercom Station, 2 Channel
The RM-702 is one of a series of professional remote intercom stations. The remote speaker/headset station allows two-channel selectable talk and listen in one rack space. The operator can talk and listen on either channel separately or talk to both channels simultaneously without tying the two channels together. Specially contoured audio response provides excellent speech intelligibility, even in high-noise environments.
The station has a convenient speaker "on/off" switch when private conversation via the headset is desired. The station accepts dynamic headsets or optional plug-in gooseneck mic.
The operator can talk on either of the channels separately or on both at once. A proprietary contoured frequency response in the mic pre-amp enhances speech intelligibility in high-noise environments. Illuminated dual-action talk buttons are electronic momentary or latching: blue-color LED while in stand-by, and amber-color LED when latched. The latching feature may be disabled if desired. The station also features a headset or microphone selector switch. The talk buttons can also be remote controlled with a footswitch.
The RM-702 features individual call buttons and visual call signaling to attract the attention of operators who have removed their headsets or turned off their speakers. The visual signaling flashes the illuminated talk button when a call is received. The call-signaling feature can be programmed to the talk buttons.
AUX. Audio Input and Program Interrupt (IFB)
The station can accept either a balanced or unbalanced line-level audio input through the DB-15 connector on the rear panel. The program can be monitored at the station or fed into channel B, where it can also be set up for IFB/Program interrupt from this or any other Encore station.
Each channel has its own sidetone control. This allows the operator to vary the level of their own voice as heard in the headset. When the announce button is pressed, the microphone signal is routed to a connector on the back panel. Relay contacts are also available for muting speakers or turning on a signal light. The station accepts Clear-Com's 9" or 18" gooseneck microphone.
* Selectable one- or two-channel communication
* Individual listen volume controls
* Momentary/latching talk buttons
* Balanced audio input with program interrupt (IFB)
* "Hot mic" and line-level outputs
* Studio announce output with relay
* Optional plug-in gooseneck mic
* Wide-range high-output speaker
* Production studio consoles
* Single-channel program interrupt system "IFB" for talent cueing
* Portable sound system equipment racks
* Low-profile "top of console" locations
* Any 2-channel intercom requirement where rack space is at a premium
Input Impedance: >= 2Kohms
Mic Limiter Range: >= 20dB
Input Impedance: >= 1Kohms
Mic Limiter Threshold: 0dBu 3dB
Output Impedance: <= 25ohms
Output Impedance: >= 200 ohms
Output Impedance: 180 ohms
Input Current (Idle): <=90mA
Intercom: (2) XLR-3M (1 per channel); (2) XLR-3F(1 per channel)
Hot Mic / IFB Interface: (1) 1/4 in. (0.64 cm) phonejack
* Rear Panel Controls: (12) Option switches
(2) Program send level controls
(1)Program monitor level control
* Dimensions (W x H x D): 19" x 1.75" x 7"
