____________________ > Abingdon
> System components
> Old Style
> Hydrolic Components
> Universal laser diode driver power supply 1.8WATT
Universal laser diode driver power supply 1.8WATT
UNIVERSAL LASER DIODE POWER SUPPLY.
* WILL POWER UP ANY LASER DIODE OF ANY WAVELENGTH UP TO 2 WATTS OF OPTICAL OUTPUT, C-MOUNTS, TO-3, TO-18, TO-5, 3 PIN, 2 PIN. ETC.
* CONSTANT CURRENT REGULATED SYSTEM.
* ADJUSTABLE CURRENT POT, THIS IS EXTREMELY IMPORTANT, THIS STOPS YOU FRYING YOUR LASER DIODES, YOU DO IT BY STARTING AT ZERO CURRENT AND SLOWLY RAMPING UP THE CURRENT AND WATCHING THE OUTPUT INTENSITY OF THE LASER DIODE AND NOTICING THE POINT IN WHICH THE LASER DIODE REACHES ITS PEAK, AND DOES NOT REQUIRE EXTRA CURRENT WHICH OVERHEATS-OVERRATES-SHORTENS THE LIFE OF YOUR LASER AND IN THE END FRIES YOUR DIODE. THIS WAY YOU WILL SAVE YOUR EXPENSIVE LASER DIODES.
* POWERS UP ON ANY MAINS SUPPLY, 80-250 VOLTS AC INPUT 50-60Hz.
* YOU CAN ALSO BYPASS THE HIGH-VOLTAGE SIDE OF THE CIRCUIT BOARD AND DIRECTLY INJECT 5VDC TO POWER UP THE PSU IF YOU WANT. THIS MAKES A GREAT MOBILE DEVICE, ITS SIMPLE TO HAVE A HANDHELD HIGH POWER BATTERY OPERATED DPSS 532 GREEN LASER, THIS IS HOW I POWERED SOME OF MY FIRST 532nm MOBILE HAND HELD LASERS, I SIMPLY SOLDERED UP A PACK OF NICAD AND NIMH AAA BATTERIES AND HAD THE LASER AND HEAT SINK FAN COOLED SITTING ON TOP OF A ALUMINIUM BOX FULL OF AAA BATTERIES, THAT IS AROUND THE SIZE OF A CIGARETTE PACKET.
* THIS PSU IS TESTED AND IS NEW. COMES WITH ALL ITS PLUGS.
