____________________ > Abingdon
> System components
> Old Style
> Hydrolic Components
> Low presure Components
> 2 ton overhead crane gantry steel i beam lot
2 ton overhead crane gantry steel i beam lot
(5) Columns or Uprights 11'6" Long x 9 x 4.5 inch beam on each of these uprights there is a plate on each end for bolting to the floor and bolting to beams that connect across. Plates measure 18x18 (bottom) 16x8 (top)
I beam Cross pieces 10'8" long x 12 x 5 inch beam
Runners for hoist or trolley : 20' x 12 x 5 inch beam
This whole thing bolts together to make an overhead 2 ton gantry. No bolts included or hoist. Just the steel fram as descibed/pictured.
This was used previously as a two ton gantry it is very heavy duty style I beams 1/2 inch at center taper out to 3/8 on ends
