____________________ > Aurora
> System components
> New Style
> Ifs D1300 R3 - rack mount data transceiver
Ifs D1300 R3 - rack mount data transceiver
The IFS D1300 series data transceivers provide point-to-point transmission of half-duplex (2-wire) EIA RS-485 tri-state data signals over one or two optical fibers. The transceivers are transparent to data encoding allowing for broad-range compatibility. When used as a line-terminating device, these modules are also compatible with the IFS D2300 series drop and repeat data transceivers. Models within this series are available for use with multimode or singlemode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates power and transmit/receive data status indicating LED s for monitoring proper system operation. The modules are available in either stand-alone or rack mount versions.
* Transparent to Data Encoding / Compatible with Major Data Protocols
* Distances up to 25 Miles (40 km)
* Comprehensive Lifetime Warranty
* Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature; Mechanical Shock; Vibration; Humidity with Condensation; High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. Automatic Resettable Solid-State Current Limiters
* Point-to Point Network Architecture
* Hot-Swappable Rack Modules
* No In-field Electrical or Optical Adjustments Required
* Power; Transmitter and Receiver Data Status LED Indicators
* Data rates up to 400 kbps NRZ
* Meets EIA RS-485 Specifications
IFS D1300-R3 Transparent to Data Encoding / Compatible with Major Data Protocols IFS D1300-R3 Distances up to 25 Miles (40 km) IFS D1300-R3 Comprehensive Lifetime Warranty IFS D1300-R3 Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature; Mechanical Shock; Vibration; Humidity with Condensation; High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. Automatic Resettable Solid-State Current Limiters IFS D1300-R3 Point-to Point Network Architecture IFS D1300-R3 Hot-Swappable Rack Modules IFS D1300-R3 2-Wire (Half-Duplex) IFS D1300-R3 No In-field Electrical or Optical Adjustments Required IFS D1300-R3 Power; Transmitter and Receiver Data Status LED Indicators IFS D1300-R3 Data Re-clocking IFS D1300-R3 True Tri-State Output IFS D1300-R3 Data rates up to 400 kbps NRZ IFS D1300-R3 Meets EIA RS-485 Specifications
