____________________ > Auburn
> System components
> Old Style
> Hydrolic Components
> High pressure Components
> 61 pc alloy steel tap and die set sae / metric w/case
61 pc alloy steel tap and die set sae / metric w/case
61PC Tap and Die Alloy Steel SAE/METRIC
Item Name: 61PC TAP & DIE SAE/MM 401021S(5/C)
Made from alloy steel. Drills 5pcs in following size: 2.5, 3.3, 4.2, 5.0, 6.8.
Drills;Screw extractors; Tap handle;s Die handle; Center Punch. Range SAE 1/4- 1/2" Metric M6-M12
61pc. Alloy Steel TAP and DIE SET SAE and METRIC.
These Taps and Dies are made from Alloy Steel, NOT just cheap carbon steel!
5pc. Metric HSS Drill Bit Set, Sizes 2.5mm, to 6.8mm.
5pc. Screw Extractors (EZ Outs) Sizes #1 to #5.
One 10 inch long, High Polished, adjustable Tap Handle with knurled ends for a sure grip, Hardened Black steel holding blocks securely hold Taps.
One 3 inch, High polished T-type Tap Handle.
One 10 inch long, High Polished, adjustable Die Handle with knurled ends for a sure grip, also there's an adjustable centering guide to help keep the tool level, and three holding screws to hold the Die securely.
One Flat head screwdriver to tighten the 3 Die holding screws on the Die handle.
11 SAE Alloy Steel Taps and 11 SAE Alloy Steel Dies from 1/4"x 20 to 1/2"x 20 including 1/8"NPT27.
11 Metric Alloy Steel Taps and 11 Metric Alloy Steel Dies from M6x 1.0 to M12 x 1.75 & M12x 1.25 including 1/8"BPT28.
Included free is a PVC blow molded case to help keep it all organized.
Free s/h within 48 U.S. States (street address)
